Join Date: Aug 2017
Location: Outside Chicago
Thanks Dave & BA,
There are no obstructions with the wires/vacuum lines or the carpet/or insulation on the interior. With the engine off there is slight resistance from off idle only, and with foot or hand pressure there is no problem in any of the other travel. Today I removed the assembly and reinstalled it in a slightly different configuration. I felt the action from under the car and could feel no issues. I could not drive it today as it is wet out, however I will try it ASAP.
The linkage is connected at the correct point on the TB as I went back through the installation instructions and found it to be correct.
I tried to attach that diagram, but my skills with a PC are evidently limited and I couldn't get the correct file extension to allow it.