Impala Tech - View Single Post - Fuel line clean up
View Single Post
post #2 of (permalink) Old 07-26-2020, 10:28 AM
jayoldschool
Moderator
 
Join Date: Jul 2009
Location: Canada
Posts: 1,486
 
I made my own on my 71 where I used an Edelbrock 1405. Patterned the line out of a coat hanger, then duplicated the bends on hard line by hand and a brake rotor. A rotor is a great tubing bender. You get the big radius around the outside, medium on the hat, small on hub, and you use the lugs to hold line as you do tight bends. I cut in an inline filter up near the carb, too.

Two doors, four doors, wagons, and ragtops.
jayoldschool is offline  
 
 
For the best viewing experience please update your browser to Google Chrome