Impalas.net banner

62 Impala Engine bay / clutch linkage Pics NEEDED

3K views 1 reply 1 participant last post by  windsma 
#1 ·
I am almost finished w/ a 100% Restoration of my 62 Impala SS that has been in the family for 25 yrs.

If someone could please post a high rez, detailed Engine bay pic non-A/c.

I need to know if the heater valve was black or brass from the factory.

Do i really have to buy the short heater hose to attach the valve to the heater core? What have you guys done?

Engine harness / light harness routing and where the plugs go? (other than the obvious)


Also 10 yrs ago the engine and trans were installed, given i was 18 at the time, i really dont remember how the zbar is attached to the clutch fork. Nor do i have the parts to do it w/. (Muncie 4 spd)
62 Forks could not be bought through my supplier. I have something that looks like a pivot ball style fork. Dent w/ two retainer springs to hold the pivot ball in (pictures later) It may have come from my 67 Nova clutch parts.

any help would be greatly appreciated.


teaser pic.
 
See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top