|Topic Review (Newest First)|
|03-15-2018 01:06 PM|
Originally Posted by JonnyB4free View Post
|01-02-2018 05:51 PM|
A 14 inch wheel was stock for your car; but the same outside tire diameter existed with a 15 inch wheel (used with disc brakes). The same thing happened for the three years that the factory flirted with 16 inch wheels before switching over to 17 inch wheels (18 inch on the Corvette). In every case there is a tire that matches the 14 inch original tire's diameter so that the car sits at the same height. It ls has the same outside size so that your speedometer works, and the wheels and tires fit in the wheel wells.
What changes as the wheel diameter increases is that the height of the side wall shrinks and the ride gets worse as the side walls can not flex.
This is true for the twenty inch wheels and tires that fit on my pick-up as well. They are much taller than a twenty inch car wheel and tire, but they are the same outside diameter as the 16.5 inch wheel that this combo replaced on a pick-up. So if you put a 20 inch tire off of a pick-up truck on a 20 car wheel you couldn't get it in the wheel well as it is a foot taller than a car tire.
|01-02-2018 02:57 PM|
Originally Posted by 67SS View Post
|01-02-2018 06:26 AM|
|gr8dain||Those polished up nicely!|
|01-02-2018 02:47 AM|
|JonnyB4free||Thank you all for the replies! I completely forgot I made this post! I was getting ready to buy some wheels, but the first time I drove the car the engine seized up, so I've been trying to sort that out! Turns out there was a huge hole in the oil pan and I spun a few bearings after I put a quart and a half of oil in it. But my dad had some old rusty Cragar SS mags that I polished up and will make work until I can afford the wheels I want!|
|12-02-2017 10:18 PM|
|12-02-2017 02:41 PM|
|Bubs66||I've got 285-40-R18 on the back and 245-45-R17 on the front with no issues.|
|10-05-2017 03:29 PM|
Originally Posted by jayoldschool View Post
lol, well big compared to the 235s that are on it now!
|09-30-2017 12:27 PM|
To see if this size tire and wheel will fit:
You need either this professional tool made of die cast aluminum:
If you don't want to spend nearly two grand for the fitment tool used above; you can buy this consumer (hobbyist) version of the above professional one made of plastic and uses a wire coat hanger for a tire:
I have had mine for years and I went to my local tire shop and formed a hand full of coat hangers to match a lot of the common sized tires requested by my customers to be mounted on their cars. They hung on my shop wall all marked with a label denoting the size of the tire profile, which generated a lot of questions as to what they were for.
Measuring is the only way you will know what will fit your car. No one who tells you on line "yes big by huge fits my car" will pay your mounting charges if the tire and wheel that fits his modified car won't fit your car. Many tire shops have this professional device that models a custom wheel to see if your wheel choice will work with your tire choice; but they charge for it's use.
That is why I tell everybody to buy this tool.
|09-30-2017 11:18 AM|
|09-29-2017 05:27 PM|
|09-28-2017 04:07 PM|
Almost all wheels are neutral. That means the hub is in the middle of the wheel so an eight inch wheel would have four inches of back spacing (give or take an eighth of an inch). As far as Chevrolets go the only steel wheel that is eight inches wide was used on the Corvette and is a Kelsey-Hayes rally wheel. You can buy rally wheels from four and a half inches wide to ten inches wide.
In the south wheel rights pass out business cards at every roundy-round race because they are always in demand. A wheel right can cut apart a standard steel wheel and reweld it in any width you might want with any back spacing. They don't last long on the track because that is the function of roundy-round racing, wrecking cars. If there were no wrecks no one would show up.
|09-28-2017 03:41 PM|
|superstang01||Where is the best place to buy steel wheels? Also, if I were to buy a 15x8 rim, what backspacing should I go with?|
|09-27-2017 10:54 PM|
thank you everyone!
How tall can I go?
|09-26-2017 04:14 PM|
I am running 20x8 front and 20x9.5 rear, 0 offset on both. 275/35 rear 245/35 front. I'm planning on running taller tires in the future, these came on the wheels when I bought them on CL. My car is bagged and I can lay frame with 13's but not with 20's. In the picture is laid out as low as it can go.
|09-24-2017 07:22 PM|
|jayoldschool||8.5 front 10" rear is no problem if you get your offset correct. Tire width and height will be important as well, of course.|
|09-24-2017 06:06 PM|
What's the biggest wheel I can fit under an Impala
On Friday I looked at a friend's 1967 Impala Sedan. I decided I am going to buy it. I went down and applied for a personal loan. While I'm waiting for that to go through I have been scouring the depths of the internet but I have yet to find any information on this. It has 13" good Dayton's on it and they aren't coming with the car, and frankly they are not my style anyways. When the car is all the way down, it lays frame. I'm the kind of guy that likes vehicles laying on the ground with big wheels with huge lips. Does anybody know the biggest size wheels I can fit under a laid out 67 without having to do tubs?