Impala Tech

Impala Tech (
-   Engine (
-   -   New Carb and Spacer (

Darkoverlift 05-05-2019 06:26 PM

16 Attachment(s)
1962 Impala SS, 283 V8. Edlebrock 500 CFM AVS 2 and Edlebrock 1 inch spacer installed.

Any idea what the manifold make or model is on the car? Its iron and no make brand listed on it.

Deadwolf 05-06-2019 10:23 AM

It is most likely an older factory 4 barrel intake. With the cost of aluminum intakes these days I would look into an edelbrock Torquer II intake, as you'll get more out of that than the carb spacer is going to give you.

Big Dave 05-06-2019 10:33 AM

Post the casting number off the manifold. Holley square bore manifolds are rare and appeared on Corvettes only for the most part (though the full size also used them). A Corvette owner wanting to remove his Torker II for sake of originality would pay through the nose for that manifold if it is a square bore flange and not an old Rochester 4GC manifold with an adapter plate on top of it.

Big Dave

Darkoverlift 05-06-2019 05:33 PM

1 Attachment(s)
Is this the casting number

Big Dave 05-07-2019 09:21 AM

Casting number 3872783 is off of a 1966 Impala-Corvette 327 275 horse equipped with a
Holley carb.

Big Dave

All times are GMT -4. The time now is 09:45 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

For the best viewing experience please update your browser to Google Chrome