Impalas.net banner

1967

  1. Want to buy a 1967 Impala 4 Hard Top

    Welcome Forum
    Hey Guys, I am from Germany and my dream is to drive a 1967 Chevrolet Impala. It's insanely hard to find a 4door Hardtop, especially in Germany , so I hope the forum can help me out and maybe someone wants to sell his Impala :) Thank you very much
  2. Axles misalignment?

    Brakes & Suspension
    I finished putting together the 10 bolt 8.2 differential on my 67 Impala but didnt notice until today while putting on the new parking brake cable/brakes that my axles are not rolling together. One spins opposite of the other. Ive tried looking up reasons why this is but google keeps dodging the...
  3. Companion flange removal tool?

    Site Discussion
    As Im starting to reinstall the guts to my rear differential, Im reviewing my service manual for my 67 and notice a tool called "Companion Flange Remover J-8614" being listed. I've checked tool shops but dont see this tool. Does anyone know where to locate it?
  4. 1967 Impala Dash Swap

    Restoration Corner
    Hey, Gang! Quickly... I own two 1967 Impala. Both are four-door hardtops... One is an air conditioning car, the other is not. The vehicle that is not an air conditioning car is running, driving, functioning in full. The AC car is not. My question that I would like some thoughts on: I fully...
  5. 1967-66 interchangeability

    General Tech
    Hi there I came across a guy parting out his 66 396 A/C Caprice in town and he has the motor already sold :clonk: but he is selling the 12 bolt non posi rear end for $150 and the entire A/C system for $250. I have a 1967 Impala 4D factory A/C but gutted no compressor no lines and the condenser...
  6. Backing Plates (67 Impala)

    Brakes & Suspension
    Hey gang, I'm now getting into the repair/rebuild of my front and rear brakes. Remaining with drums style not going to disc. My question is, I have to replace the backing plates on the front spindles and when I find replacements, they all seem to be for the rears (those are going to be replaced...
  7. 67 Chevy Impala

    Welcome Forum
    I am on the hunt for the perfect Supernatural car! A 1967 Chevy Impala SS! Please Help (if you can). If you have any information email me at [email protected] Thanks!
  8. 67 Impala SS convertible questions.

    Convertibles
    1. Can someone out there take a picture of their 67 convertible internal mirror bracket and send it to me? The 'correct' one I ordered doesn't seem to fit and I'm wondering if it's the part or something the previous owner did to my car. 2. Does anyone know the correct spacing and offset I...
  9. 67 SS Convertible, Many questions

    General Tech
    Alright so I got a '67 SS 327 Convertible, no records but it's rust free and runs great. So far I've updated the suspension, replaced the alternator, radiator, and done some basic stuff like distributor cap, spark plug wires, etc. The engine is slowly burning oil, about a quart every 3 months...
  10. Just joined hello

    Welcome Forum
    Hi folks I'm joe and I'm new to the site. I am in mountain view, ca and am in desperate of frequent advice since I am not made of money and I had no idea what I was getting into when I bought my 67 from a snake oil salesman. Also I would like to hear about any and all upcoming events in my area...
  11. Big Block Decode

    Engine
    I bought this engine and I started decoding it but I figure that it'd be smarter to see if anyone can help me, I attached a picture, any info?
  12. Rust on Speedometer Face Plate

    Restoration Corner
    I found a 67 140mph COPO speedometer that probably came off a biscayne and I am probably going to buy the speedometer to put in my impala, the problem is that the face has a bit of rust, is there any way to take it off without damaging the numbers and markings?
  13. 1967 Impala SS427 Replica Hood

    Body Shop
    I hear talk about the replica domed hood for a 67 Impala SS427 but does anyone know where I can get one? Maybe the insert as well? Thanks!
  14. 1967 Impala SS Plating

    Restoration Corner
    We're giving my 67 a frame off restoration and we're going to reassemble soon. Can anyone tell me what items were plated with what? I want her to look original and we have a friend that does plating. Thanks in advance!
  15. Looking for advice

    Restoration Corner
    I inherited a 1967 4-door hardtop Impala from my late great-uncle, and I was thinking about doing a stock rebuild. This is my first ever classic muscle car, and dont have the deep pockets needed for a high performance restoration. It has the 327 cid/ powerglide combination, but I was thinking...
  16. I'm new!

    Welcome Forum
    Hey guys I'm new here, and I'm looking for a 4-door postless 1967 impala, preferably in black haha.
  17. 67 Motor swap

    Engine
    I currently have a 67 with a 283 and the stock 2 speed powerglide. I'm wanting to put a 350 or a 383 in but I'm wanting to do my research before I do it. Here are a few questions: Will either motor bolt straight up or will I have to rearrange everything under the hood? Will I have to make any...
  18. 1967 Dash Light Replacement

    Electrical & Wiring
    Hey everybody! One of the lights behind my dashboard went out on the 67, how do I go about changing it? It looked behind the dash and it didn't look there was anything I could just unplug and go. Thanks!
  19. Coming Soon - 64-67 GTO kit and Intelligent Fuses!

    American Auto Wire
    Coming Monday, 12/20 from American Autowire: 1964-1967 Pontiac GTO Classic Update Series wiring kit Intelligent Fuses - sold separately and as bundles for our Highway, Power Plus, Builder, and Classic Update Series kits Visit our coming soon page for all the details.
  20. 1967 ss help please

    Welcome Forum
    Hello I am new to this site. I am currently restoring my 1967 Impala SS. I am in need of several body panels, and can't seem to find any 67ss parts on the net. Does anyone know what if any other year Impala is interchangeable with my 67ss? Will 66 or 68 body panels fit? As I said this is my...
Top