Impalas.net banner

ignition

  1. 66 impala coil issue

    Electrical & Wiring
    Hello, I have a 66 with a 70's 350 in it. Today it just turned over and wouldn't fire. I diagnosed a no-spark issue and began poking around the wiring. Long story short, I have 12v from the ignition wire that goes to the positive side of the coil, but when I hook it to the coil itself, voltage...
  2. What the heck is this on my ignition switch

    Electrical & Wiring
    Hey, everyone. I got a new set of locks all the way around for my 67 and am quite excited about finally having locks and a key that fits them. I removed the ignition switch as it was a bit easier getting the lock out and came across this odd "bracket". It's right at the end of the threads and...
  3. 1965 Impala 283 Ballast Resistor

    Electrical & Wiring
    I have a 1965 Chevrolet Impala with 283 w/ an entirely new ignition set-up (new distributor, cap, wires, points, coil, etc.). When hooking up the ignition to the coil (+) there is 12V. I recently purchased a new ballast resistor (BWD RU4) and hooked it up with the ignition on 1 side and the...
Top