Impalas.net banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi everyone, I recently had my aluminum lower front seat corner trim polished along with the long vertical front seat back corner trim. The shop took the trim off and I was going to put it on when the polishing was complete, except the 58 and 59 shop manuals, and the assembly manuals do not show how the small brackets / clips are fastened back on the seat frame. Is there an interior assembly manual for 59 that shows a diagram? Or, if you have a 59, and could send a photo of your brackets that hold these two pieces to the seat frame, that would be great. I could send photo of the brackets I’m talking about, let me know.

Thnaks again for your time and effort. Jim
 

·
Super Moderator
Joined
·
3,630 Posts
Im surprised that yours have brackets, I'm pretty certain mine just screw in right through the material to the inner seat frame.

Sent from my SM-G973U1 using Tapatalk
 

·
Registered
Joined
·
1,418 Posts
The Uppers attach directly to the Seat, but the Lowers have Brackets on '59's and '60's. I once sold a complete set and there were something like 8 to 10 separate pieces.
 
1 - 3 of 3 Posts
Top