[jdmninja89]

How’s it going everyone? I have a 62 impala and I’m have a shacking vibration when I’m on the freeway. After replacing a lot of parts , I jacked the rear up and put the gear on drive and noticed my driver side wheel is wobbly. I removed the wheels and I put it on drive again and the rotor was wobbly so down to the point I want to say the axles might be bent, the passenger side wobbles a little. Any good place do buy some new axles?

 

[62BillT]

I believe new axles are available but maybe only racing type, which will probably be a little pricey, unless that is what you may want to use anyway. Otherwise, good used would do.

 

[Jynx]

Probably best to remove yours & confirm they match but it looks as though Yukon do a standard Lefthand & Righthand replacement for your model. Good Luck.

 

[BA.]

Would be interesting to see a video of what you are seeing. I was thinking it would be REALLY hard to bend an axle unless that car was either in a bad accident or had a mondo engine and slicks at one time. (IMO)

Might be worth checking the mounting points of the rear-end, both ends of the control arms, worn/missing bushings, any loose bolts,etc. maybe check for bearing slop by trying to man-handle the assembly on your own? Hopefully nothing terribly wrong in the 'pumpkin' area to cause the issue.

 

[jdmninja89]

I have a video but I don’t know how to upload it here

 

[65_&_67_Impala]

I have a video but I don’t know how to upload it here

upload to youtube or Google drive, and then share the link

 

[wahelton]

if the axel housing is steady and the axel is wobbly you would have a problem that would destroy the bearings and seals and oil would be pouring out. I don't think so. In your statement you say the rotors are wobbly. So the drums have been replaced with disk brakes? I bet cheap Chinese stuff that is causing your wheel wobble.

 

[jdmninja89]

Ok so I replaced both axles with some Yukon axles , no more wobble

 

[62BillT]

I noticed their web site does not have prices.

I'm wondering what they go for?

 

[jdmninja89]

if the axel housing is steady and the axel is wobbly you would have a problem that would destroy the bearings and seals and oil would be pouring out. I don't think so. In your statement you say the rotors are wobbly. So the drums have been replaced with disk brakes? I bet cheap Chinese stuff that is causing your wheel wobble.

I noticed their web site does not have prices.

I'm wondering what they go for?

paid 495

 

[Impala/Camino]

Wow, you are a fast worker ? March 12 first post about wobble then march 13 you inquire about axles and then march 16 you say you're done & new axles fixed problem. That's some fast fixin good job
Just 1 question so I know howed you get the parts so fast ?

 

[jdmninja89]

Wow, you are a fast worker ? March 12 first post about wobble then march 13 you inquire about axles and then march 16 you say you're done & new axles fixed problem. That's some fast fixin good job
Just 1 question so I know howed you get the parts so fast ?

I’m the type of person that if there is an issue with my cars I won’t be able to sleep at night until I figure out the issue. The axles I bought locally from a differential shop , good thing he had them in stock.

 

[jdmninja89]

Was getting a vibration at high speeds , ended up being a bent driver side axle

youtube.com

 

[jayoldschool]

Mosler can also make axles for anything.